This post is dedicated to Gedalya and Aba Neeman (grandfather and great-grandfather of my love). On their tombstones engraved “Loved the work and manufacturing of water pumps in the land of Israel.”
This revolutionary water pump is the fifth pump in Category V which is dedicated to “machines for raising water from pools, and from wells which are not deep, and from running streams.”
Al-Jazari won his fame mainly because of exotic water clocks full of surprises like the Castle water clock or The water clock of the peacocks(in Hebrew) and wonderful automata like The Arbiter for a drinking session and many more. This pump, like the four pumps in previous chapters, shows that al-Jazari was involved in the real hardship of the people around him. Water pumping is essential to any society, for drinking water, watering crops, for excess water and flood pumping, during fire extinguishing and more.
The common pumps in the world of Islam in the 12th century were the Shaduf (Arabic شادوف) and the Saqiya (Arabic ساقية). Both are ancient irrigation tools for raising water. The Shaduf is fully manual and consists of an upright frame on which suspends a long pole with a bucket at one end a counterweight at the other. The operator pulls the rope until the bucket is full of water. With the help of the balancing weight, he lifts the bucket and pours them into the irrigation canal. The Saqiya is a mechanical device raising a chain of buckets or pots using a donkey or an ox to raise the water.
These two pumps are quite similar to a human using a bucket to raise water, only saving work and effort. The water wheel pump does not imitate the human action and can be seen as an extension and development of the piston pump of Ctesibius (Κτησίβιος), a Greek inventor and mathematician in the golden period of Alexandria, in Ptolemaic Egypt. He wrote the first treatises on experiments with compressed air which earned him the title of “father of pneumatics”. He invented the first piston pump which was apparently very popular in the Roman Empire. At least twenty five such pumps were found in excavations of Roman sites. You can read more here. None of Ctesibius writing survived, we know of him only because of later writers quoting his work. I don’t know about Ctesibius pumps in the Muslim world, and there is no reference to Ctesibius in al-Jazari’s book. We shall never know what, if any, information about Ctesibius was available to al-Jazari.
How does al-Jazari water wheel pump work?
The technical explanation, as always, will be colored in blue, so anyone who is not interested in intake or discharge valves can skip those bits. This is a short YouTube clip from “Technology Science in Islam” explaining the operation of the pump:
The energy source of the pump is the water wheel, turning by water flow. The water wheel is connected through gears to a wheel with an eccentric pin (positioned not in the Center) within a rail inside the crank connected to a fixed point. When the wheel turns the rod moves left, and one piston is pulled, and one piston is pushed. This mechanism is called a slider crank mechanism, and it converts straight-line motion to rotary motion, as in a reciprocating piston engine, or to convert rotary motion to straight-line motion, as in a reciprocating piston pump. This mechanism is essential to modern machinery.
Two pistons are attached to suction pipes going down to the river. The suction pipes continue upward and come together to a single supply. The suction pipe has two directional one-way valves called the intake valve and discharge valve. This is a modified drawing of the piston and the valves. In al-Jazari original drawing there is no water, and both valves are closed, which is possible only during construction and impossible during pumping. In addition, in the facsimile edition, the drawing is cut:
When the piston moves backward (as in the drawing), the intake valve opens, and the discharge valve is closed. So the pump is disconnected from the supply line and draws water from the river. When the piston moves forward (pushed) the intake valve closes, and the discharge valve opens, and water is pushed upward in the supply pipe. This mechanism is called double action because when one piston is being pushed the second piston is being pulled, so the water supply is continuous.
There are three major innovations in al-Jazari’s pump in comparison to Ctesibius pump. Each one would justify a separate patent today. In the Web, there are lists of what al-Jazari invented, for example, here or here. The discussion on the right for a patent is foreign to al-Jazari and the 12th century in general. In a future post, I hope to write about the history of patents and the concept of intellectual property in The Book of Knowledge of Ingenious Mechanical Devices.
- The piston pump of Ctesibius was a manual pump and requires a person to operate it. Al-Jazari used a water wheel to power the pump. Al-Jazari also writes that the water wheel is like the one used to rotate millstones which were well known at his time. This is a big advantage in pumps for drinking water or irrigation
- The use of waterwheel demanded to convert circular motion (water wheel) to linear motion (motion of the cylinders). History of the crank (in various forms) is documented from the 2nd century BC in China. Al-Jazari knew the book by the “Banu Musa” which includes a crankshaft. But the crank-slider mechanism is more efficient and remains in use to this day, without significant changes.
- Ctesibius’s pump only works when immersed in water. If the water level decreases, it will cease pumping. The al-Jazari’s pump has suction pipes that allow it to function properly above the river water level. A decrease in water level (up to a point) should not affect it at all.
Was this pump built or is it just an idea?
Occasionally someone wonders if al-Jazari indeed built his machines or were they just fantasy blueprints or suggestions that never materialized? Unfortunately we don’t have any proofs. The Palace in Diyarbakir was only partially excavated and there is no archeological evidence of al-Jazari machine. I don’t know any external evidence, for example, a Muslim traveler visiting the Palace in the 13th century who was able to report one of the exotic machines like the elephant clock. However, I’m convinced that the pump, like the Palace door and Castle clock, described in previous posts, were indeed built. I have two arguments:
- The number and level of details make you feel that this pump was built. For example, a rope wrapped on the copper piston to improve sealing. The very use of the rope is a hint of an improvement cycle. It is hard to assume that this was a part of a design which never came to life. Moreover, al-Jazari is very specific and requested a rope made from cannabis used at his time by sailors. This rope was selected, probably, due to its resistance to water. Could it be that al-Jazari thought about all these details although the pump was not built? Possible but not very likely.
- In 1976 the London Science Museum built an accurate model of the water wheel pump. The only difference was that the pump was powered by electricity and not by the Thames. A picture of the model is below. The model produced a steady stream of water with zero problems. It is possible that al-Jazari was a wonderful designer and the museum team was the first to realize his design that just worked great on the first try. It is more likely to think, and experience quite often proved it, that the shift from the drawing board to a real machine requires iterations and improvements. The Museum staff’s success relies thus on the practical experience of al-Jazari’s pump.
Aba Neeman Pumps Ltd.
In 1980 I learned Chemistry at Tel Aviv University and I was looking for a summer job for my livelihood. I don’t remember exactly how it was arranged, but I went to work in the factory “Aba Neeman Pumps Ltd”, that was owned and managed by the grandfather of my love, Gedalia’s Neeman. In my first day in the factory, I helped cast impellers in the sand. Quite similar to what al-Jazari did 800 years before me. I don’t want you to have the wrong impression about my technical skills at the time. I got 5 minutes explanation about the task and until the end of the workday I broke with hammer unneeded bronze parts. The offices were tiny and no one needed my knowhow in chemistry or computers. Most of the summer I was an apprentice of the lathe operator. It was wonderful. I enjoyed it so much that I took an evening course in Lathe operation. The factory was built by Aba Neeman in 1900. He was a real autodidact; His formal studies amounted to a “Yeshiva”, a Jewish educational institution that focuses on the study of traditional religious texts. All he knew about machines was learned from his work and experimentation. He worked in the metalwork workshop of Leon Stein, who did all the metal work required for the young Jewish community in Israel: repairing wagons, maintenance of pumps, and a repair of the steam boiler in the winery in Zichron. In the absence of electricity and engines, the lathe was operated by the movement of the legs like old Singer sewing machines. Such a manual lathe was the beginning of the factory. Aba Neeman specialized in water pumps and amazingly, the only difference between the pump made by Aba Neeman and al-Jazari’s pump, explained above, is that Aba Neeman’s pump was powered by a diesel engine and al-Jazari’s pump was powered by a water wheel. The Author and farmer Moshe Smilanski wrote that “the pump of Aba Neeman was working for 44 years with no problems” ( from “Inventor and Efforts” by Saul Avitsur [Hebrew]). This was not eight hundred years ago, only in the last century but “the farmer and author” and a pump that holds 44 years sound so far away, something to long for, like al-Jazari.